Pinguin Taifun 3, Khaki

This description has been machine translated from the original text.

The vestibules are sufficiently high, the rigidity of the construction makes the tent suitable for use in more demanding conditions.

The Tropico is made of Polyester with a polyurethane coating, which gives it a water column of 4,000mm. The seams are taped against leakage with heating tape.

The lining is made of laminated Polyethylene with Rip-Stop treatment.

The members consist of laminate segments with a diameter of 8.5 (main members) and 9.5mm (vestibule support).

The tent is double-skinned and consists of an inner tent and an outer shell - tropic.

The inner tent has a rectangular floor plan with two entrances on its longer sides. The outer tent is an octagon, it also has two entrances with two vestibules, suitable for storing luggage, for example.

The ventilation is located in the top of the dome of the tropical tent. The ventilation windows are shaped so that they are not tilted by the wind, and can be closed with Velcro if necessary. This prevents leakage even in rain with strong winds.

The concept of the tent is based on the principle that the rod structure strung in the sleeves is outside the tropic. After threading the rods through the sleeves, the tropic and the inner tent (which is suspended under the tropic) are erected at the same time. The advantage of this method is that the inner tent can be detached from the canopy and the canopy can then be erected separately. This way you get a single-skin tent without a ground sheet.

Tent construction

Push the construction rods through the sleeves on the outside of the tent and insert the ends of the rods into the brass eyelets on the loops on the bottom edge of the tent. Then clip the buckles on the straps and at the ground inside the tent to erect the tent. Fasten the inner tent into the loops on the inside of the tent. Anchor the tent with pegs and cords and fasten with plastic clips.