Fenix E06R PRO is a powerful flat rechargeable torch that pushes the boundaries of pocket-sized EDC models. Compared to its smaller variants (Fenix E06R and Fenix E03R V2.0), it offers not only significantly higher output, but also a unique combination of features including strobe, ultraviolet light, laser pointer and innovative control. Despite its still compact flat design, which fits perfectly in a pocket, it delivers high light output of up to 1600 lumens (ANSI) and a beam distance of up to 160 metres. The torch is fitted with a pair of top-tier LEDs (Luminus SST20 and SFT25), which allow you to switch between cool focused (spotlight) and neutral wide (floodlight) beam patterns. Power comes from a built-in Li-Pol rechargeable battery with high capacity of 1650 mAh, which provides runtime of up to 111 hours in Moonlight economy mode. Charging is handled by a modern USB-C connector directly on the torch body. Fenix E06R PRO features five modes of white focused light, five modes of neutral wide light, UV light with a wavelength of 365 nm at 1300 mW, red laser (pointer) and several modes of so-called Breathing light – light around the power button and in the tail of the torch at 0.5 to 1 lumen, which you can use for discreet signalling or locating the torch. It is controlled via a side button, a switch for focused and wide light, and a tactical button in the tail. The torch comes with a sturdy clip, so you can attach it to a pocket or rucksack strap. Also practical is the battery charge status indicator in the button. The torch is excellent for EDC and thanks to its flat shape you can carry it with you at all times without it getting in the way.

All torch parameters (light output, battery runtime, water resistance, impact resistance and beam distance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix E06R PRO torch specifications

• Two white Luminus SST-20 and SFT-25 LEDs, a UV diode with a wavelength of 365 nm and a red laser are used, all with a lifespan of 50,000 hours.
• Two tactical modes of white light: turbo 1600 lumens (1.3 hours) and strobe 1600 lumens.
• Five modes of white focused light: 1000 lumens (2.25 hours) → 350 lumens (2.5 hours) → 150 lumens (4.5 hours) → 30 lumens (24 hours) → 5 lumens (104 hours)
• Five modes of white wide light: 750 lumens (2.3 hours) → 350 lumens (3.2 hours) → 150 lumens (4.5 hours) → 30 lumens (24.5 hours) → 5 lumens (111 hours).
• UV light: 1300 mW / 365 nm.
• Red laser 0.39 mW / 650 nm (Class 1).
• Pulsing light around the power button and in the tail (Breathing light): red flashing, blue flashing, red and blue pulsing at 1 lumen and RGB pulsing and Aurora light at 0.5 lumen.
• The torch is powered by a built-in rechargeable battery with a capacity of 1650 mAh.
• Battery charge status indication in the button.
• Charging via a modern USB-C connector, which is internally waterproof.
• Memory for the last selected white light power mode.
• Intelligent overheat protection.
• Clip for attachment to a rucksack strap, pocket and similar.
• CNC machined aluminium alloy body with Type III hard anodized surface finish against scratching.
• Dimensions 12.3 cm (length) x 3.1 cm (width) x 2.1 cm (height).
• Beam distance 160 metres (6234 cd).
• Weight 104.1 grams (including rechargeable battery).
• Water-resistant to IP66 standard (spraying with strong water jets from all directions).
• Impact-resistant to drops from a height of 1 metre.
• The package includes the torch, a wrist loop and a USB-C charging cable.
• A micro-USB to USB-C adapter can be purchased separately.

Use

To turn on or off the white light, hold the main or tail button for approximately 0.5 seconds. The four basic power modes then switch by pressing the same button. Turbo mode is activated by holding the tail button for 0.8 seconds. Strobe can be activated by holding the main button for 1.2 seconds. Switching between focused and wide reflector is done by pressing the oval switch button.

UV light is turned on and off by holding the purple button on the side of the torch for approximately 0.5 seconds.

Red laser is turned on and off by holding the red button on the side of the torch for approximately 0.5 seconds.

Button backlighting and tail light – the 3D light ring around the main button including lights in the tail of the torch can be turned on by double-tapping the main button when the torch is off. Subsequent button presses switch between five functions – red flashing → blue flashing → red and blue flashing → RGB light → Aurora. The light ring is turned off again by holding the main button for 0.5 seconds.

Memory for the last selected mode – when the white light is turned on, the torch always turns on in the last selected power mode.

The control buttons can be locked to prevent accidental activation, for example when carrying in luggage – to lock, turn off the torch and hold both the red and purple button on the side of the torch for 2 seconds. The torch will then flash, signalling that it is locked. To unlock, hold the buttons again for 2 seconds.

Battery charge indication – with the torch off, briefly press the main button once, then a small LED in the button will light up for three seconds. Green light indicates the battery is charged to 100–85%, green flashing indicates 85–50%, red light signals the battery is charged to 50–25% and red flashing indicates the battery is charged to less than 25%. The number of available white light modes may vary depending on the current charge level.

Overheat protection – if the torch temperature exceeds 60 °C, the output will automatically reduce. Once the temperature drops below 60 °C, the output will increase again.

Low battery warning – the torch will gradually automatically switch to the lowest power mode and the indicator LED in the switch button will start flashing red.

Charging

• Connect the torch via a USB-C cable to a computer, mains USB adapter or car USB adapter. Any mobile phone charger with a USB-C connector can also be used for charging.
• During charging, the indicator LED in the button lights red; when fully charged, it lights green.
• Charging voltage: 5 V, maximum charging power 5 W (5 V / 1 A).
• During charging, the torch can be used except for turbo mode and colour modes. The number of available white light modes may vary depending on the current charge level.
• The battery used does not suffer from memory effect, so the torch can be recharged at any time.

Warning

• Do not disassemble sealed parts yourself, as this will void the warranty.
• If the torch does not switch to higher power modes, or does not light up, the battery is flat – charge the torch.

We offer a 30-day period for returning or exchanging goods if, for any reason, you are not satisfied with your order.

For more information, please see our Return Policy here.

Orders received by 14:00 are dispatched the same day. Delivery usually takes place on the next business day, depending on the selected shipping method. During busy periods, please allow 1–3 business days for order processing.

Free delivery from €200 / for oversized shipments from €400

Free of charge, ready for pickup on the next business day

For more information, please see our Delivery page.