Fenix E06R is a larger variant of the successful miniature rechargeable torch Fenix E03R V2.0. Compared to it, it not only has higher power, but also ultraviolet light and a laser pointer. Despite its compact dimensions and weight of just 54 grammes, it offers high light output of up to 700 lumens (ANSI). The light beam evenly illuminates a wide area up to a distance of 110 metres. Power is supplied by an integrated rechargeable battery with a capacity of 750 mAh, which charges via a modern USB-C connector on the side of the torch. There are a total of four white light modes, UV light with a wavelength of 365 nm at 580 mW, red laser (pointer ≤0.39 mW) and several modes of so-called Breathing light - lights around the power button at 0.5 to 1 lumen, which you can use for discreet signalling or identifying the torch location. The torch is supplied with a solid clip, so you can attach it to a pocket, rucksack strap or cap peak and free up your hands when using it. Thanks to a magnet in the torch base, you can attach it to anything metal. Also practical is the battery charge status indicator in the button. This pocket torch is excellent for EDC and thanks to its small dimensions, flat shape and weight, you can always carry it with you.

All torch parameters (light output, battery runtime, water resistance, impact resistance and beam distance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix E06R torch specifications

• Two white Luminus SST-12 LEDs, UV diode with wavelength 365 nm Luminus SST-08 and class 1 red laser are used, all with a lifespan of 50,000 hours.
• Four white light modes: 700 lumens (1.3 hours) → 150 lumens (2.8 hours) → 30 lumens (12 hours) → 5 lumens (60 hours).
• UV light: 580 mW / 365 nm.
• Red laser (pointer): ≤0.39 mW.
• Pulsing light around the power button (Breathing light): red flashing, blue flashing, red and blue pulsing at 1 lumen and RGB pulsing at 0.5 lumen.
• The torch is powered by a built-in rechargeable battery with a capacity of 750 mAh.
• Battery charge status indication in the button.
• Charging via a modern USB-C connector, which is internally water-resistant.
• Memory for the last set white light power mode.
• Intelligent overheat protection.
• Clip for attachment to rucksack strap, pocket, cap peak and similar.
• CNC machined aluminium alloy body with Type III hard anodized surface finish against scratching.
• Dimensions 6.9 cm (length) x 2.9 cm (width) x 1.6 cm (height).
• Beam distance 110 metres (3100 cd).
• Weight 54 grammes (including battery).
• Water-resistant to IP66 standard (spraying with strong water jets from all directions).
• Impact-resistant to drops from a height of 1 metre.
• The package includes a key ring, wrist loop and USB-C charging cable.
• A micro-USB to USB-C adapter can be purchased separately.

Use

To turn white light on or off hold the main button for approximately 0.5 seconds. You can switch power modes at any time during operation by pressing the button. To turn on Breathing light, turn off the torch and press the button twice quickly. To turn off, hold for 0.5 seconds.

UV light is turned on and off by holding the purple button on the side of the torch for approximately 0.5 seconds.

Red laser is turned on and off by holding the red button on the side of the torch for approximately 0.5 seconds.

Control buttons can be locked to prevent accidental activation, for example when transporting in luggage - to lock, turn off the torch and hold both the red and purple buttons on the side of the torch for 2 seconds. The torch will then flash twice, signalling that it is locked. To unlock the buttons, hold both coloured buttons again for 2 seconds.

Battery charge indication - with the torch off, press the main button once briefly, which will light a small diode in the button for three seconds. Green light indicates the battery is charged to 100-85%, green flashing 85-50%, red light indicates the battery is charged to 50-25% and red flashing indicates the battery is charged to less than 25%.

Overheat protection - if the torch temperature exceeds 65°C, the power will automatically reduce. As soon as the temperature drops below 65°C, the power will increase again.

Low battery warning - the torch will gradually automatically switch to the lowest power mode and the indicator diode in the power button will start flashing red.

Charging

• Connect the torch via USB-C cable to a computer, mains USB adapter or car USB adapter. Any mobile phone charger with a USB-C connector can also be used for charging.
• During charging, the indicator LED in the button lights red, and after full charge it lights green.
• The battery used does not suffer from memory effect, so you can charge the torch at any time.

Warning

• Do not disassemble sealed parts yourself, as this will void the warranty.
• If the torch does not switch to higher power modes, or does not light up, the battery is flat - charge the torch.

We offer a 30-day period for returning or exchanging goods if, for any reason, you are not satisfied with your order.

For more information, please see our Return Policy here.

Orders received by 14:00 are dispatched the same day. Delivery usually takes place on the next business day, depending on the selected shipping method. During busy periods, please allow 1–3 business days for order processing.

Free delivery from €200 / for oversized shipments from €400

Free of charge, ready for pickup on the next business day

For more information, please see our Delivery page.