Pistol LED torch Fenix GL06-365 is designed specifically for use on short weapons SIG Sauer P365, P365XL, P365X, P365-180 and P365 SAS, or others with the same weapon rail parameters. It offers maximum light output of 600 ANSI lumens with a beam distance of up to 140 metres. The torch is powered by a single Li-ion rechargeable battery Fenix ARB-L16-700UP with an integrated micro USB connector (the battery and cable are included in the packaging). If needed, a disposable lithium CR123A battery can also be used. Simplified torch operation is ambidextrous (for right-handed and left-handed users). Mounting on the weapon rail is simple and requires no tools – the torch slides onto the weapon rail and is secured with a lever. The torch is therefore suitable for professionals, sport and hobby shooters and airsoft users.

All torch parameters (light output, battery runtime, water resistance, beam distance and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix GL06-365 pistol torch specifications

• Premium LED CREE XPL HI is used with a lifespan of 50,000 hours.
• Lighting modes:
  • With Fenix ARB-L16-700UP rechargeable battery: 600 lumens (50 minutes) → strobe.
  • With disposable CR123A battery: 400 lumens (1.5 hours) → strobe.

• TIR optics create a light cone with a beam distance of 140 metres (4880 cd) – measured using the supplied rechargeable battery.
• Protection against reverse battery insertion and protection against excessive battery discharge.
• Powered by one Fenix ARB-L16-700UP Li-ion rechargeable battery (included in the packaging), alternatively also other Li-ion RCR123A / 16340 rechargeable batteries.
• Alternatively, a single disposable lithium CR123A battery can be used, but the torch has reduced output of 400 lumens with it.
• Dimensions 6.1 cm (length) x 2.8 cm (height) x 2.3 cm (width).
• Compatible with SIG Sauer P365, P365XL, P365X, P365-180 and P365 SAS weapon rails.
• Weight 69 grammes (including rechargeable battery).
• Intelligent overheat protection.
• Torch body made from aircraft-grade hardened aluminium.
• Resistant hard-to-scratch surface – Type III hard anodized.
• Impact resistant to drops from a height of 1 metre.
• Trapezoidal threads highly resistant to wear.
• Waterproof to IPX7 standard (tested underwater at a depth of 1 metre).
• The packaging includes a Fenix ARB-L16-700UP rechargeable battery, a charging micro USB cable, a spare O-ring and an instruction manual.

Operation

From the factory there may be an insulation cover inside the torch on the rechargeable battery. Before first use, remove it from the battery.

One click on either switch will turn the light on/off.

For momentary activation press and hold either switch. The torch will light while you hold the switch and turn off when you release it.

Strobe activation: Pressing both switches simultaneously will activate the strobe. The strobe can also be activated by pressing and holding one switch and clicking the other switch. Pressing either switch again will exit strobe mode immediately, or pressing both switches simultaneously will return you to the last used output.

Intelligent overheat protection: During extended use of the torch, a large amount of heat accumulates. When the light reaches a temperature of 55 °C or higher, it automatically reduces output by several lumens to lower the temperature. When the temperature drops below 55 °C, it returns to standard output.

Warning

• Do not disassemble sealed parts in the torch head yourself, as this will void the warranty and may cause damage.
• Fenix recommends using only quality batteries.
• If you will not be using the light for an extended period, remove the battery.
• If the torch lens becomes contaminated with powder residue after shooting, try cleaning it with fine steel wool, or try using gun cleaning paste.
• Long-term use may result in O-ring wear. To maintain proper water sealing, replace the ring with a new one.
• Since weapon maintenance requires the use of organic solvents, avoid contaminating key torch components. This could result in torch damage and loss of warranty.
• Regular cleaning of electrical contacts ensures trouble-free torch operation, as dirty contacts can cause the torch to flicker, light intermittently or not light at all for the following reasons:
  • The rechargeable battery is discharged – replace it or recharge it.
  • Contacts inside the torch are dirty – clean them with cotton wool soaked in alcohol.

Warranty

Five-year warranty on the torch, two-year warranty on the rechargeable battery.

We offer a 30-day period for returning or exchanging goods if, for any reason, you are not satisfied with your order.

For more information, please see our Return Policy here.

Orders received by 14:00 are dispatched the same day. Delivery usually takes place on the next business day, depending on the selected shipping method. During busy periods, please allow 1–3 business days for order processing.

Free delivery from €200 / for oversized shipments from €400

Free of charge, ready for pickup on the next business day

For more information, please see our Delivery page.