Pistol LED torch Fenix GL07 is designed specifically for handguns. It offers maximum light output of 700 lumens with a beam distance of up to 240 metres. The torch is powered by a single Li-ion rechargeable battery Fenix ARB-L16-800UP, which charges via a modern USB-C connector on its side (the battery and cable are included in the packaging). If needed, a single-use CR123A lithium battery can also be used. The torch control is fully ambidextrous, ideal for right-handed and left-handed users. Mounting on a weapon rail is quick and requires no tools – the torch slides on easily and locks in place thanks to the quick-clamp mechanism. It can be attached to Picatinny MIL-STD-1913 and GLOCK standard weapon rails (does not fit slimline category weapons, for example Glock 30 model). It fits Czech Police service weapons (CZ 75D).

A major advantage is the modular sliding rail, which ensures that the torch can be moved forwards and backwards to lock in the best position on the weapon. This guarantees broad compatibility with various weapon models. The torch is therefore suitable for professionals, sport and hobby shooters and airsoft users.

All torch parameters (light output, battery runtime, waterproofing, beam distance and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Specifications for Fenix GL07 pistol torch

• Uses a premium LED Luminus SFT-12R with a lifespan of 50,000 hours.
• Lighting modes:
  • With Fenix ARB-L16-800UP rechargeable battery: 700 lumens (1 hour) -> strobe.
  • With single-use CR123A battery: 180 lumens (5.5 hours) -> strobe.

• TIR optics create a light cone with a beam distance of 240 metres (12,000 cd) – measured using the supplied battery.
• Protection against reverse battery insertion and protection against over-discharge of the rechargeable battery.
• Powered by one Fenix ARB-L16-800UP Li-ion rechargeable battery (included in packaging), alternatively other Li-ion RCR123A / 16340 rechargeable batteries.
• Alternatively, a single-use CR123A lithium battery can be used, but the torch will have reduced output of 180 lumens with it.
• Dimensions 6.63 cm x 2.82 cm x 3.16 cm.
• Compatible with Picatinny MIL-STD-1913 and GLOCK standard weapon rails.
• Weight 74 grams (including battery).
• Intelligent overheat protection.
• Torch body made from aircraft-grade hardened aluminium.
• Durable, scratch-resistant surface – Type III hard anodised.
• Impact-resistant from drops of 1 metre height.
• Trapezoidal threads highly resistant to wear.
• Waterproof to IPX7 standard (tested underwater at 1 metre depth).
• Included in the packaging are the Fenix ARB-L16-800UP rechargeable battery, USB-C charging cable, mount bracket for Picatinny rail attachment (GLOCK bracket is pre-installed on the torch), spare O-ring and instruction manual.

Operation of Fenix GL07 torch

Important notice

WHEN HANDLING THE GL07 TORCH, ALWAYS FOLLOW THE INSTRUCTION MANUAL AND SAFETY GUIDELINES.

From the factory, there may be an insulating cover inside the torch on the battery. Before first use, remove it from the battery.

With a single click on either switch, you will turn the light on/off.

For instant activation, press and hold either switch. The torch will light while you hold the switch and turn off when you release it.

Strobe activation – Pressing both switches simultaneously will activate the strobe. The strobe can also be activated by pressing and holding one switch and clicking the other switch. Pressing either switch again will exit instant strobe mode, or pressing both switches simultaneously will return you to the last used output.

Battery replacement – Unscrew the torch head and insert the battery with the positive pole (+) facing towards the torch head, then screw the head back on.

Intelligent overheat protection – With prolonged torch use, a large amount of heat accumulates. When the light reaches a temperature of 55 °C or higher, it automatically reduces output by several lumens to lower the temperature. When the temperature drops below 55 °C, it returns to standard output.

Low battery warning – If the rechargeable battery voltage drops below the set level, the torch automatically reduces output. If the battery voltage drops below 3 V, the torch will flash three times every 2 minutes to remind you that the battery needs to be recharged or replaced.
Note: This function is active only when using rechargeable batteries.

Warning

• Do not disassemble sealed parts in the torch head yourself, as this will void the warranty and may cause damage.
• Fenix recommends using only quality batteries.
• If you will not be using the torch for an extended period, remove the battery.
• If the torch glass becomes soiled with powder residue after shooting, try cleaning it with fine steel wool, or try using gun cleaning paste.
• Prolonged use may result in O-ring wear. To maintain proper water sealing, replace the ring with a spare.
• Since weapon maintenance requires the use of organic solvents, avoid contaminating key torch components. This could damage the torch and void the warranty.
• Regular cleaning of electrical contacts ensures trouble-free torch operation, as dirty contacts can cause the torch to flash, light intermittently or not light at all for the following reasons:
  • Battery is discharged – replace it or recharge it.
  • Contacts inside the torch are dirty – clean them with cotton wool soaked in alcohol.

Warranty

Five-year warranty on the torch. Two-year warranty on the battery.

We offer a 30-day period for returning or exchanging goods if, for any reason, you are not satisfied with your order.

For more information, please see our Return Policy here.

Orders received by 14:00 are dispatched the same day. Delivery usually takes place on the next business day, depending on the selected shipping method. During busy periods, please allow 1–3 business days for order processing.

Free delivery from €200 / for oversized shipments from €400

Free of charge, ready for pickup on the next business day

For more information, please see our Delivery page.