The Fenix HL40R zoom rechargeable head torch delivers a light output of up to 600 lumens (ANSI) and a beam distance of up to 147 metres. Power is provided by a built-in lithium-polymer rechargeable battery with a capacity of 2000 mAh, which charges via a micro-USB connector directly in the head torch. The light source is a modern Cree XP-L HI V2 LED, with its light directed by special TIR (Total Internal Reflection) optics with the ability to adjust the width of the light cone (zoom function). A total of 7 power modes are available, including an SOS strobe mode for emergency situations. Despite the adjustable optics, the head torch maintains water resistance according to the IP66 standard, so it will withstand heavy rain without any problems. The head torch strap is fitted with reflective elements, which ensure good all-round visibility when moving on the road. Thanks to its weight of just 130 grammes, the Fenix HL40R is excellent for hiking, search and rescue work, as a running head torch, camping, photography, a head torch for anglers and other activities.

All parameters of the head torch (light output, battery runtime, water resistance, beam distance and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix HL40R head torch specifications

• Powerful white Cree XP-L HI V2 LED with a lifespan of 50,000 hours. Seven lighting modes: BURST 600 lumens (switches to the previous lighting mode after 1 minute) → 300 lumens (4.5 hours) → 130 lumens (11 hours) → 70 lumens (22 hours) → 30 lumens (50 hours) → 4 lumens (200 hours) → SOS 30 lumens (100 hours).
• TIR optics with focusing function creates a cone with a beam distance of 43 - 147 metres (472 cd - 5426 cd).
• Digitally regulated for constant brightness.
• Uses a built-in lithium-polymer rechargeable battery with a capacity of 2000 mAh.
• Four-segment battery charge status indicator.
• Charging via micro-USB connector.
• Convenient operation via two switches.
• The head torch can be tilted in the holder to set the desired direction of light.
• Made from durable plastic and aircraft-grade aluminium alloy.
• Strap with reflective elements increases passive safety, doubled rear section increases comfort when wearing on the head.
• Impact resistant to drops from a height of 1 metre.
• Dimensions: 6.8 cm x 5.4 cm x 4.2 cm.
• Weight 130 grammes (including rechargeable battery and strap).
• Water-resistant and dust-proof according to the IP66 standard (spraying with strong water jets from all directions).
• The package includes a strap and a charging USB cable.
• You can additionally purchase a Fenix APB-20 case, Fenix APB-30 case, USB mains adapter and USB car adapter for the head torch.

Use

• Holding the right (main) button for 0.5 seconds will always turn the head torch on to the 70 lumens mode.
• Further presses of this button allow you to switch between 30 - 70 - 130 - 300 lumens modes at any time during operation.
• Burst mode (600 lumens) is activated by holding the right button for 1.2 seconds (even if the head torch is off).
• Pressing the right button again will return the head torch to the previous mode.
• Holding the left (smaller) button for 0.5 seconds will always turn the head torch on to the 4 lumens mode (suitable for reading, for example).
• Further presses of this button allow you to switch between 4 lumens and SOS modes.
• The width of the cone is adjusted by rotating the ring around the optics.
• Rotating clockwise narrows the cone, rotating anticlockwise widens it.
• Battery charge status indication - a short press of the left button (the head torch must be off) activates the LED battery charge status indicator on the top of the head torch. Four lit LEDs mean the battery is charged to more than 80%, three lit means 60-80%, two means 40-60%, one means 20-40% and one flashing indicates the battery is charged to less than 20%.
• Overheat protection - operation in Burst mode is limited to 1 minute at a time, after which the head torch will return to the previous lighting mode. The control buttons can be locked to prevent accidental activation, for example when transporting in a rucksack - hold both buttons pressed for 3 seconds. The head torch will then flash. To unlock, hold both buttons again for 3 seconds.
• Charging - Remove the rubber cover of the micro-USB connector on the back of the head torch and use the supplied USB cable to connect the head torch to a computer, mains USB adapter or car USB adapter. You can also use any mobile phone charger with a micro-USB connector for charging. During charging, the four indicator diodes on the top will light up gradually, and after full charging all will remain lit. Charging time for a completely discharged battery is approximately 4 hours. The battery used does not suffer from memory effect, so the head torch can be recharged at any time. Seal the USB connector cover securely after each charge. During charging, you can turn the head torch on, but only in 4 lumens mode.
• Warning Do not disassemble sealed parts yourself, as this will void the warranty. If the head torch is flashing, not switching to higher power modes, or not lighting up, it could be one of the following reasons: The battery is almost discharged – charge it.
• Warranty Statutory warranty 2 years.

We offer a 30-day period for returning or exchanging goods if, for any reason, you are not satisfied with your order.

For more information, please see our Return Policy here.

Orders received by 14:00 are dispatched the same day. Delivery usually takes place on the next business day, depending on the selected shipping method. During busy periods, please allow 1–3 business days for order processing.

Free delivery from €200 / for oversized shipments from €400

Free of charge, ready for pickup on the next business day

For more information, please see our Delivery page.