Hunting torch Fenix HT32 with white, red and green LED offers top light output of up to 2500 lumens in white light and beam distance of up to 640 metres. Maximum green light output is 1400 lumens with beam distance 210 metres and maximum red light output is 400 lumens with beam distance 120 metres. Light-emitting diodes from American manufacturer Luminus are mounted in TIR optics, which creates a well-focused light cone. Power is supplied by one Li-ion rechargeable battery type 21700 with capacity 5000 mAh and built-in USB-C connector for charging (battery is included in the package).

The multicoloured LED torch Fenix HT32 has five white light functions with runtime of up to 29 hours including strobe flashing and two red and green light functions. At the rear of the torch is a dual tactical switch, which allows faster and more reliable operation in emergency situations. For example, you can quickly activate strobe mode directly. The torch is compatible with long gun mounts and the AER-05 cable switch. Fenix HT32 is a top light tool for professionals, hunters and anyone who will benefit from its durability, high output and colour light options.

All torch parameters (light output, battery runtime, water resistance, beam distance and impact resistance) are measured in accordance with standard ANSI/NEMA FL 1-2009.

Specifications for Fenix HT32 hunting torch

• Premium white LED Luminus SFT-70, red LED SFT-20 RA and green LED SFT-20 CG with 50,000 hour lifespan are used.
• Nine lighting modes:
  • Five white light modes: 2500 lumens (1.8 hours) → 1000 lumens (2.5 hours) → 350 lumens (8 hours) → 50 lumens (29 hours) → Strobe 2500 lumens
  • Four colour light modes: red light 400 lumens (3.25 hours) → red light 150 lumens (4.8 hours) → green light 1400 lumens (2.5 hours) → green light 350 lumens (6 hours).

• Large TIR optics for focused light cone with beam distance 640 metres (101,000 cd). Beam distance in red light is 120 metres and in green 210 metres.
• Electronics with digital power regulation, protection against reverse battery insertion and protection against over-discharge of the rechargeable battery.
• Power is supplied by the included Li-ion rechargeable battery 21700 5000 mAh with built-in USB-C connector.
• Dimensions 16 cm (length) x 5.2 cm (head diameter) x 2.54 cm (body diameter).
• The torch has memory and will switch on in the last set mode, except strobe.
• Torch body is made from aircraft-grade hardened aluminium, torch head fitted with impact bezel.
• Durable hard-to-scratch surface - Type III hard anodized.
• Impact resistant from drops from 1 metre height.
• Trapezoidal threads highly resistant to wear.
• Weight 185 grammes (without battery) or 258 grammes (including battery).
• Waterproof and dustproof to standard IP68 (tested underwater at 2 metre depth).
• Handles recoil without problems when used on a weapon.
• Tactical switch at the end of the torch (momentary on/off function).
• Torch comes with ARB-L21-5000U battery, USB-C charging cable, wrist cord, belt holster, spare O-ring.
• The following accessories can be purchased separately: AER-05 cable switch, ALG-15 quick-release rail mount, ALG-00 quick-release rail mount, Fenix ALG-16 M-LOK mount, Fenix ALG-18 barrel mount, barrel mount, metal magnetic barrel mount, plastic magnetic barrel mount, torch-to-optics mount, metal optics mount, Fenix ALD-05 strap for using torch on helmet.

Use

From the factory there may be an insulating cover inside on the battery. Before first use, remove it.

To switch on, press the main tactical button at the end of the torch; to activate immediately, hold the button down. By pressing the secondary mode switch button you can switch between power modes at any time during operation.

Switching light colour - with the torch on, press and hold the mode switch button; the light colour will cycle through white – red – green in order; release the button at the desired colour. The torch remembers the selected light colour even after switching off.

Strobe is activated only from the off state by pressing and holding the mode switch button.

Low battery warning - if the battery voltage drops below the set level, the torch will reduce brightness to a lower level until it reaches the lowest mode. After reaching the lowest output, the torch will flash three times every 5 minutes to remind you to recharge or replace the battery.

Intelligent overheat protection - if the torch temperature exceeds 65 °C, the output will automatically reduce. As soon as the temperature drops below 65 °C, maximum output can be used again.

Warning

• Use only quality Li-ion rechargeable batteries type 21700 with protective electronics.
• Insert batteries with the positive pole facing the torch head.
• If the protective rubber rings appear damaged after prolonged use, replace them. The rings should also be lubricated to prevent rubber erosion. By following these rules, the torch will be properly protected against water.
• If the torch flashes, does not switch to higher power modes or does not light up, it may be due to one of the following reasons:
  • Battery is almost discharged - recharge it or replace it.
  • Contacts inside the torch are dirty – clean them with a cotton bud soaked in alcohol.
  • The rear of the torch is loose, tighten it.

Warranty

Five year warranty on the torch, two year warranty on the battery.

We offer a 30-day period for returning or exchanging goods if, for any reason, you are not satisfied with your order.

For more information, please see our Return Policy here.

Orders received by 14:00 are dispatched the same day. Delivery usually takes place on the next business day, depending on the selected shipping method. During busy periods, please allow 1–3 business days for order processing.

Free delivery from €200 / for oversized shipments from €400

Free of charge, ready for pickup on the next business day

For more information, please see our Delivery page.