Ultra-powerful rechargeable torch Fenix LR60R delivers extreme light output of up to 21,000 lumens and a beam distance of up to 1,085 metres. This performance is achieved using one premium Luminus SFT-70 LED and twelve Luminus SST-40 LEDs, powered by an internal high-current Li-ion rechargeable battery with a capacity of 57.6 Wh (4x 4000 mAh). The battery charges directly in the torch via a modern USB-C connector. The torch is controlled by a rotating ring, which allows you to switch modes in two modes: search mode (up to 21,000 lm) and camping mode (up to 15,000 lm).

The torch is equipped with an OLED status display, which shows the selected power mode, remaining runtime in the given mode and the battery charge level. Additionally, the torch can be used as a power bank to charge other USB devices. This search torch is suitable for example for guarding large areas, professional use or exploration and rescue operations, and for all torch enthusiasts.

All torch parameters (light output, battery runtime, water resistance, beam distance and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix LR60R torch specifications

• The light source is one powerful Luminus SFT-70 LED and twelve Luminus SST-40 LEDs with a lifespan of 50,000 hours.
• Total of 10 lighting modes:
  • Search mode: 21,000 lumens (1.8 hours) → 3,000 lumens (3.75 hours) → 1,000 lumens (10.7 hours) → 300 lumens (24.3 hours) → 50 lumens (113 hours).
  • Camping mode: 15,000 lumens (2.17 hours) → 6,000 lumens (3 hours) → 2,000 lumens (5.4 hours) and SOS 300 lumens → Strobe 9,000 lumens.

• Powered by a replaceable high-current Li-ion rechargeable battery made up of 4x 4000 mAh cells (57.6 Wh).
• Charging via USB-C at up to 45W power. USB-A output with power bank function. Supports fast-charging protocols PD, QC2.0, QC3.0, FCP, AFC, SCP for both charging and discharging.
• OLED display shows the selected power mode, remaining runtime in the given mode and battery charge level.
• Rotating ring for quick switching of power modes.
• Digital power regulation, overheat protection.
• Combined TURBO mode of both reflectors offers a beam distance of up to 1,085 metres (294,267 cd), wide reflectors illuminate up to 352 metres (30,896 cd).
• Electronics are equipped with a protective function against excessive battery discharge; when voltage drops below a certain threshold, it automatically switches to a lower power mode.
• Dimensions 20.7 cm (length) x 8.5 cm (body diameter) x 9 cm (reflector diameter).
• Weight 1,500 grammes.
• Removable metal handle, tripod thread and shoulder strap allow the torch to be used in various situations.
• Durable hard-to-scratch surface – Type III hard anodised.
• Impact-resistant from drops of 1 metre height.
• Waterproof and dustproof to IP68 standard (tested underwater at a depth of 2 metres for 4 hours).
• Hardened ultra-clear glass lens with anti-reflective coating.
• The package includes a USB-C charging cable, spare O-ring, shoulder strap with screw and eyelet for hanging and wrist loop.
• You can additionally purchase a fast-charging GAN5 adapter, USB mains adapter, USB car adapter and coloured USB-C cable for the torch.

Use

Switching on/off and switching power modes – search mode is switched on by rotating the control ring at the torch head clockwise, camping mode is switched on by rotating the ring anticlockwise. By rotating the ring in the chosen direction, you switch between further lighting modes of the selected mode. By rotating the ring to the middle position, the torch switches off again.

Intelligent proximity sensor – the torch has a built-in protective circuit. When the reflector approaches the illuminated object (approximately 60 mm) for longer than 1 second, the torch automatically reduces power to 50 lumens to prevent damage to the object from strong light and glare from reflected light. When the reflector is more than 1.2 metres away from the illuminated object, the torch automatically restores the previously used power level. The sensor is activated as follows: Three times within 3 seconds, rotate the mechanical rotating switch to the positions off → 50 lumens → off. The OLED display will show "ON" and the torch will flash twice in 50 lumen mode, indicating that the sensor function is activated. To deactivate, three times within 3 seconds rotate the mechanical rotating switch to the positions off → 50 lumens → off. The OLED display will show "OFF" and the torch will flash eight times in 50 lumen mode, indicating that the sensor function is deactivated.

Charging – switch off the torch and open the dust cover of the charging connector, plug the USB Type-C cable into the torch and then connect the other end of the charging cable to any USB adapter. During charging, the charging status is displayed on the OLED display. Normal charging time is approximately 1.5 hours when using a fast-charging USB adapter with 40 W or higher power. During charging, the torch can only be used in 50 lumen mode. After charging is complete, remember to seal the dust cover.

Power bank function – switch off the light, open the dust cover and insert the USB cable into the discharge USB Type-A port or universal USB-C port on the torch, then connect the other end of the cable to the USB device being charged. During discharge, the current battery capacity is displayed on the OLED display; the torch can be used in all power modes. After charging the external USB device is complete, remember to seal the dust cover.

OLED display – when the torch is switched on, the OLED display shows battery capacity, selected mode and remaining runtime. If the battery is charged to less than 10%, the battery icon will start flashing on the display. If the charge level is below 5%, a large flashing discharged battery icon will be displayed on the screen to alert the user that the torch needs to be charged as soon as possible.

Intelligent overheat protection – the torch heats up during prolonged use of high power levels. When the torch reaches a temperature of 60 °C or higher, it automatically reduces power to lower the temperature. When the temperature drops below 60 °C, high power levels can be used again.

Discharged battery warning – when battery voltage drops below the set level, the torch is programmed to switch to a lower power level until 50 lumen mode is reached. After power is reduced to 50 lumens, the battery icon on the OLED display will start flashing to remind you to charge the battery in good time.

Warning

• Do not disassemble sealed parts of the torch yourself, as this will void the warranty.
• Prolonged use may lead to O-ring wear. To maintain proper water sealing, replace the ring with a spare.
• Regular cleaning of electrical contacts ensures trouble-free torch operation, as dirty contacts can cause flashing, intermittent lighting or even non-functionality of the torch for the following reasons:
  • Battery is discharged. Charge it or replace it with a charged one.
  • Electrical contacts inside the torch are dirty; clean them with a cotton bud soaked in alcohol.

Warranty

Five-year warranty on the torch and two-year warranty on the battery.

We offer a 30-day period for returning or exchanging goods if, for any reason, you are not satisfied with your order.

For more information, please see our Return Policy here.

Orders received by 14:00 are dispatched the same day. Delivery usually takes place on the next business day, depending on the selected shipping method. During busy periods, please allow 1–3 business days for order processing.

Free delivery from €200 / for oversized shipments from €400

Free of charge, ready for pickup on the next business day

For more information, please see our Delivery page.