Professional rechargeable torch Fenix WF30RE is equipped with ATEX/IECex certification for use in explosive atmospheres. The torch is powered by a specially modified Li-ion rechargeable battery ARB-L21-3000Ex with a capacity of 3000 mAh and provides a light output of up to 300 lumens with a beam distance of 149 metres. The battery is recharged directly in the torch via a USB-C connector. The torch body is made from aircraft-grade aluminium with high durability and impact resistance. The torch is designed specifically for firefighters and rescue workers, and is also suitable as a work torch in industrial facilities where explosive dusts and gases may be present. Examples include chemical plants, refineries, textile mills, paper mills, grain mills, metallurgical facilities, power stations and other industrial operations.

Certifications:

• Suitable for use in zones 1-2 of explosive gases and in zones 21-22 of explosive dust.
• Full certification details:
• IECEx: IECEx TUR 18.0042X:
  • Ex ib IIC T4 Gb
  • Ex ib IIIC T130°C Db

• ATEX: TÜV 18 ATEX 8252X:
  • II 2G Ex ib IIC T4 Gb
  • II 2D Ex ib IIIC T130°C Db

• The torch also holds CSA, NEPSI and GRGT certifications.

Specifications of the ATEX work torch WF30RE:

• Features a powerful Cree XP-G3 LED with neutral colour temperature and a lifespan of 50,000 hours.
• Five power modes: 300 lumens (7.3 hours) → 100 lumens (22.8 hours) → 30 lumens (68 hours) → 5 lumens (313.3 hours) → SOS (30 lumens).
• Uses a special Li-ion Fenix ARB-L21-3000Ex rechargeable battery with a capacity of 3000 mAh. This is a modified type certified for explosive atmospheres.
• The battery is recharged directly in the torch via a modern USB-C connector.
• The electronics are equipped with a protection function against over-discharge of the battery; when the voltage drops below a certain threshold, it automatically switches to a lower power mode.
• The torch has memory and can be switched on in the last set mode, except for emergency modes (Eco and SOS).
• Battery charge status indication.
• Made from aircraft-grade hardened aluminium A6061-T6.
• Durable hard-to-scratch surface – Type III hard anodized.
• Impact-resistant from drops of up to 1 metre.
• Waterproof and dustproof to standard IP68 (tested underwater at a depth of 2 metres for 30 minutes).
• Textured aluminium reflector for a perfect light beam with a beam distance of 149 metres (5572 cd).
• Dimensions 15.17 cm (length) x 3.4 cm (head diameter) x 2.8 cm (body diameter).
• Weight 218 grammes (including battery).
• The package includes: Fenix WF30RE torch, Fenix ARB-L21-3000Ex battery, charging USB adapter, charging USB-C cable, EU Declaration of Conformity, spare O-ring, wrist loop, user manual, warranty card.
• The Fenix ALD-05 strap can be purchased separately for use of the torch on a helmet.

Operation:

With the torch switched off, press and hold the switch for 0.5 seconds to switch on to the last used standard power mode (General mode). With the torch switched off, press the switch twice quickly to switch on to the 5 lumens emergency mode (Extreme mode). You can switch between power modes at any time during operation by pressing the side button within the selected mode group. With the torch switched on, press and hold the switch for 0.5 seconds to switch off.

Battery charge status indication – press the torch button (with the torch switched off). If the indicator light is green, the battery is charged to more than 85%. Green flashing means 50-85% capacity. If it is red, it is charged to 25-50%. Red flashing indicates that less than 25% battery capacity remains.

Low battery warning - the torch will gradually automatically switch to the lowest mode and the indicator in the button will start flashing red.

Charging - Remove the dust cover cap and connect the USB-C charging cable to the charging port. After charging is complete, replace the dust cover cap. During charging, the indicator in the button lights red. When fully charged, it lights green. Do not charge the torch in an explosive atmosphere. When charging, use the supplied USB charging adapter to ensure safety.

To replace the battery, unscrew the torch end cap using an 8 mm hex key. Never replace the battery in an explosive atmosphere.

Warning

• Perform all servicing, charging and battery replacement outside explosive atmospheres!
• Use only the manufacturer-certified Fenix rechargeable battery.
• If the sealing rubber O-ring on the torch end cap thread is damaged, replace it with the spare from the torch packaging.
• If the torch is flashing, does not switch to higher power modes or does not light up, this may be due to one of the following reasons:
  • The battery is discharged; charge it or replace it.

Warranty

Five-year warranty on the torch, two-year warranty on the battery.

We offer a 30-day period for returning or exchanging goods if, for any reason, you are not satisfied with your order.

For more information, please see our Return Policy here.

Orders received by 14:00 are dispatched the same day. Delivery usually takes place on the next business day, depending on the selected shipping method. During busy periods, please allow 1–3 business days for order processing.

Free delivery from €200 / for oversized shipments from €400

Free of charge, ready for pickup on the next business day

For more information, please see our Delivery page.