Fenix TK11R Rechargeable LED Flashlight
Fenix TK11R Rechargeable LED Flashlight
Available in stock
-
Estimated delivery: Sep 12 - Sep 16
Specification
Specification
Fenix TK11R is a rechargeable tactical torch with simple operation and the ability to rapidly activate strobe mode, delivering up to 1600 lumens. It is fitted with a top-tier LED Luminus SFT-40, which provides a beam distance of up to 420 metres. The torch uses a dual tactical switch, which enables faster and more reliable operation in emergency situations. The torch head is equipped with a striking bezel, so it can be used to break glass or for self-defence. Robust construction allows the torch to be used on long weapons, making it suitable for professionals, armed forces and hunting. The torch is powered by a single high-capacity Li-ion 18650 3400 mAh rechargeable battery (included in the package), which charges directly in the torch via a modern USB-C connector and provides power for up to 25.5 hours of operation, or in an emergency from two disposable CR123A batteries. Solid and waterproof design makes this tactical torch primarily suitable for harsh outdoor conditions and use by security forces, search and rescue operations and hunting.
All torch parameters (light output, battery runtime, waterproofing, beam distance and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.
Fenix TK11R torch specifications
- Powerful LED Luminus SFT-40 with a lifespan of 50,000 hours.
- Six power modes: 1600 lumens (1.8 hours) → 350 lumens (4.2 hours) → 30 lumens (25.5 hours) → strobe 1600 lm with variable frequency.
- Runtime figures are measured with the rechargeable Li-ion 18650 battery with a capacity of 3400 mAh (included in the package).
- Two 3V lithium CR123A batteries can alternatively be used for power.
- USB-C charging port is hidden under a rubber cover on the torch body.
- Battery charge indication.
- Highly efficient smooth reflector for a light beam with a range of up to 420 metres (45,000 cd).
- Intelligent overheat protection, low battery warning.
- Dimensions 14.55 cm (length) x 3.4 cm (head diameter) x 2.35 cm (body diameter).
- Weight 117.5 grammes (without battery), 166.5 grammes (with battery).
- Durable aircraft-grade hardened aluminium body construction.
- Scratch-resistant surface – Type III hard anodized.
- Impact resistant to drops from a height of 1 metre.
- Waterproof and dustproof to IP68 standard (tested underwater at a depth of 2 metres for 30 minutes).
- Hardened ultra-clear glass lens with anti-reflective coating.
- Dual tactical switch at the end of the torch (instant on/off function by holding, instant strobe).
- Trapezoidal threads highly resistant to wear.
- The torch comes with a rechargeable battery, wrist loop, USB-C charging cable, spare O-ring and belt holster.
- The following optional accessories are available for purchase: AER-02 cable switch, AOT-M transport cone, AOF-M red filter and AOD-M diffuser.
- The following accessories are also compatible with the torch: ALG-15 quick-release rail mount, ALG-00 quick-release rail mount, Fenix ALG-16 M-LOK mount, Fenix ALG-18 barrel mount, barrel mount, metal magnetic barrel mount, plastic magnetic barrel mount, torch-to-optics mount, metal optics mount, Fenix ALD-05 strap for helmet-mounted torch use, FB-1 bicycle mount, Fenix bicycle mount.
- USB mains adapter and USB car adapter can be purchased separately for the torch.
Using the TK11R torch
The torch may come with an insulating cover on the battery from the factory. Remove it from the battery before first use.
To turn on/off, press the larger tactical button located at the end of the torch; to activate instantly, hold the button. By pressing the side mode switch button, you can switch between power modes at any time during operation. To switch to strobe mode while the torch is on, hold the mode switch button for approximately 0.5 seconds. To turn the torch on directly in strobe mode, press and hold the mode switch button.
Intelligent overheat protection – because the torch achieves high power output, it experiences a temperature rise. If the temperature exceeds 65°C, the power will automatically reduce. Once the temperature drops below 65°C, maximum power can be used again.
Battery charge indication – the torch always indicates battery status three seconds after being switched on. Green indicates sufficient charge (100% – 85%), green flashing 85% – 50%, solid red 50% – 25% and flashing red critically low battery (25% – 1%). If the battery is fully discharged, the torch will gradually automatically switch to lower power modes.
Charging – flip open the rubber cover of the charging connector on the side of the torch and connect the supplied cable (USB-C connector); connect the other end of the cable to a computer, mains USB adapter or car USB adapter. During charging, the side indicator glows red. When fully charged, it turns green. Charging a fully discharged battery takes approximately 3.5 hours. The torch cannot be used during charging.
Warning
- Use only quality rechargeable 18650 batteries with protection electronics.
- Insert batteries with the positive pole facing the torch head.
- If the protective rubber rings appear damaged after prolonged use, replace them. The rings should also be lubricated to prevent rubber erosion. By following these rules, the torch will be properly protected against water.
- If the torch flashes, does not switch to higher power modes, or does not light up, it may be due to one of the following reasons:
- The battery is discharged – charge it or replace it.
- The contacts inside the torch are dirty – clean them with a cotton bud soaked in alcohol.
- The head, body or rear of the torch are loose – tighten them.
Warranty
Five-year warranty on the torch and two-year warranty on the battery.
30-day returns
30-day returns
We offer a 30-day period for returning or exchanging goods if, for any reason, you are not satisfied with your order.
For more information, please see our Return Policy here.
Delivery
Delivery
Orders received by 14:00 are dispatched the same day. Delivery usually takes place on the next business day, depending on the selected shipping method. During busy periods, please allow 1–3 business days for order processing.
Free delivery from €200 / for oversized shipments from €400
Free of charge, ready for pickup on the next business day
For more information, please see our Delivery page.
Payment details are processed through a secure system.