Fenix Tk25 R&B Tactical LED Flashlight, 1000 Lumens
Fenix Tk25 R&B Tactical LED Flashlight, 1000 Lumens
Out of stock
Specification
Specification
Powerful tactical torch Fenix TK25 R&B offers top light output of up to 1000 ANSI lumens of white light and additionally two coloured LEDs (red and blue). Switching between white and coloured light mode is very simple, you only need to rotate the torch head by 90°. Very solid and water-repellent design and dual-layer body construction makes this tactical torch suitable for harsh outdoor conditions, for professionals, armed forces and hunting. The Fenix TK25 R&B torch uses a dual tactical switch, which allows faster and more reliable control in emergency situations. You can, for example, easily switch it on directly into strobe mode. The torch is powered by digitally controlled constant current to guarantee constant light output even when battery voltage drops (during their gradual discharge). The Fenix TK25 R&B has five white light modes with runtime of up to 110 hours and three coloured light modes. All torch parameters (light output, battery runtime, water resistance, beam distance and impact resistance) are measured in accordance with the ANSI / NEMA FL 1-2009 standard.
Fenix TK25 R&B torch specifications:
- Two powerful white Cree XP-G2 S3 LEDs with a lifespan of 50,000 hours and two coloured Cree XP-E2 LEDs (blue and red) are used.
- Five power modes: 1000 lumens (2 hours) -> 300 lumens (5.3 hours) -> 100 lumens (22.3 hours) -> 15 lumens (110 hours) -> strobe (strobe flashing).
- Three coloured light modes: red 150 lumens (7.5 hours) -> red 25 lumens (40 hours) -> blue 60 lumens (6.6 hours)
- Dual aluminium reflector for perfect light cone with beam distance over 225 metres (12650 cd).
- 2 3V lithium batteries of type CR123A or 1 rechargeable high-capacity Li-ion rechargeable battery of type 18650 can be used for power.
- Runtime times are measured with a rechargeable Li-ion rechargeable battery of type 18650 with a capacity of 3500 mAh.
- Electronics with digital constant power regulation and protection against reverse battery insertion.
- Dual spring system - high torch durability when used on a weapon.
- Overheat protection, after 20 minutes of operation at full power the torch switches to the second highest mode.
- Dimensions 14.26 cm (length) x 4 cm (head diameter) x 2.5 cm (body diameter).
- Weight 156.5 grammes (without batteries).
- Made from aircraft-grade hardened aluminium.
- Impact resistant from drops of 1 metre height.
- Trapezoidal threads highly resistant to wear.
- The torch has memory and will always switch on in the last set mode (does not apply to strobe).
- Durable hard-to-scratch surface - Type III hard anodized.
- Waterproof and dustproof according to IP68 standard (tested underwater at a depth of 2 metres).
- Hardened ultra-clear glass lens with anti-reflective coating.
- Dual tactical switch at the end of the torch (momentary on / off function).
- Solid clip for secure and simple torch carry (removable).
- The torch, thanks to its design, does not slip in the hand and does not rotate when placed down.
- The torch comes with a wrist cord, rotatable belt holster and spare O-rings.
- Batteries are not included in the packaging.
Use
- To switch on, press the larger button located at the end of the torch, for momentary activation press the button lightly.
- By pressing the secondary mode switch button you can switch power modes at any time during operation.
- To switch to strobe mode when the torch is on, hold the mode button for approximately 1 second.
- To switch on the torch directly into strobe mode, press and hold the mode button.
- Between white and coloured light modes, switch by rotating the torch head by 90°. Coloured light will always start in red 150 lumens mode.
- Between coloured modes you can switch again using the second smaller button.
Warning
- Use only quality 3V CR123A batteries and 18650 li-ion rechargeable batteries to prevent torch damage, for example due to battery leakage.
- Insert batteries with the positive pole facing the torch head.
- If the protective rubber O-rings appear damaged after prolonged use, replace them. The O-rings should also be lubricated to prevent rubber erosion.
- By following these rules the torch will be properly protected against water.
- If the torch flashes, does not switch to higher power modes or does not light up, it may be due to one of the following reasons: - Batteries are almost discharged - replace them. - Contacts inside the torch are dirty - clean them with a cotton bud soaked in alcohol. - The head, body or rear of the torch are loose, tighten them.
Warranty
5 year warranty.
30-day returns
30-day returns
We offer a 30-day period for returning or exchanging goods if, for any reason, you are not satisfied with your order.
For more information, please see our Return Policy here.
Delivery
Delivery
Orders received by 14:00 are dispatched the same day. Delivery usually takes place on the next business day, depending on the selected shipping method. During busy periods, please allow 1–3 business days for order processing.
Free delivery from €200 / for oversized shipments from €400
Free of charge, ready for pickup on the next business day
For more information, please see our Delivery page.
Payment details are processed through a secure system.