The Fenix WT25R is a universal rechargeable work torch with a unique articulated design featuring a tilting reflector, in which a Cree XP-L HI LED is mounted with a light output of up to 1000 lumens and a beam distance of up to 220 metres (ANSI). The head tilts through a range of 105 degrees, ensuring maximum versatility.

The Fenix WT25R torch is also equipped with a sturdy steel clip for easy carrying on a belt or work clothing, and a magnetic tail cap, which allows the light to be easily attached to any ferrous metal object. With its variability, the torch is particularly useful for work use, camping, outdoor activities and many other tasks. The torch is powered by a Lithium-ion rechargeable battery type 18650 with a capacity of 3400 mAh, which is included in the packaging and charges via a USB cable with a magnetic tail cap directly in the torch.

The Fenix WT25R features six brightness levels, including strobe and SOS signal, which allows users to choose a suitable compromise between lighting intensity and runtime. Despite all its functionality, the torch maintains minimal dimensions and a low weight of 137 grammes including the battery.

All torch parameters (light output, runtime on battery, waterproofing, beam distance and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Specifications for the Fenix WT25R work LED torch

• A powerful Cree XP-L HI LED is used with a lifespan of 50,000 hours of operation.
• Six power modes: Constant brightness modes: 1000 lumens (3.66 hours) → 400 lumens (4.83 hours) → 150 lumens (11 hours) → 50 lumens (29 hours). Strobe modes: strobe (1000 lumens) → SOS signal (50 lumens).
• Digitally regulated for constant brightness, electronics remember the last set mode.
• Uses one Fenix Lithium-ion 18650 rechargeable battery with a capacity of 3400 mAh.
• Battery charge status indicator.
• Charging via magnetic connector on the torch.
• Textured reflector for a light beam with a beam distance of 220 metres (11905 cd).
• Made from hardened aircraft aluminium and impact-resistant plastic.
• Metal parts treated with hard anodising type HA-III.
• Dimensions 13.53 cm (length) x 2.94 cm (width) x 2.41 cm (height).
• Weight 137 grammes (including battery).
• Electronics with reverse battery insertion protection.
• Impact resistant to drops from a height of 1 metre.
• Waterproof to IP66 standard
• Magnetic tail cap - the torch can be attached to any ferrous metal object.
• Hardened ultra-clear glass lens with anti-reflective coating.
• Capable of standing independently on a flat surface, the head can be tilted through a range of 105° in several steps.
• The package includes the torch with a Fenix 18650 3400 mAh rechargeable battery, USB cable with magnetic tail cap, wrist strap, spare O-ring. A USB mains adapter and USB car adapter can be purchased separately for the torch.

Use of the Fenix WT25R LED torch

• The torch is switched on and off by holding the button for 0.5 seconds, and once switched on, the brightness modes are cycled by pressing it briefly.
• To switch to strobe, hold the button for 1.2 seconds, then press the button briefly again to activate the SOS signal.
• The torch remembers the last selected brightness mode (except for strobe modes).
• The control button can be locked to prevent accidental activation, for example when carrying in luggage - press the control button twice quickly (within 0.5 seconds), the torch will then flash twice, signalling that it is locked.
• To unlock, press the button twice quickly again.
• Overheat protection: because the torch reaches a high output of 1000 lumens, the temperature rises in the highest mode during prolonged operation. If the temperature exceeds 60 °C, the output will automatically reduce. Once the temperature drops below 60 °C, the highest output can be used again.
• Charging: connect the charging cable to a computer USB connector, mains USB adapter or car USB adapter. Attach the cable to the charging pad on the torch, it will attach itself using magnets. During charging, the indicator light on the cable glows red, and glows green when charging is complete. Charging a fully discharged Fenix ARB-L18-3400 battery takes approximately 4.5 hours.
• Battery charge status indicator (works only with the original battery): After a brief press of the button (the torch must be off), the LED battery charge status indicator in the button is activated. Four lit LEDs mean the battery is charged to more than 80%, three lit 60-80%, two 40-60%, one 20-40% and one flashing indicates the battery is charged to less than 20%.
• Warning:
  • Do not disassemble the sealed part in the torch head yourself, this will void the warranty.
  • If the protective rubber O-rings appear damaged after prolonged use, replace them.
  • The O-rings should also be lubricated to prevent rubber erosion.
  • By following these rules, the torch will be properly protected against water.
  • If the torch flashes or does not light up, it may be due to one of the following reasons:
    • The battery is discharged, charge it.

    • The contacts inside the torch are dirty - clean them with a cotton swab soaked in alcohol

Warranty:

Five years warranty on the torch, two years on the battery.

We offer a 30-day period for returning or exchanging goods if, for any reason, you are not satisfied with your order.

For more information, please see our Return Policy here.

Orders received by 14:00 are dispatched the same day. Delivery usually takes place on the next business day, depending on the selected shipping method. During busy periods, please allow 1–3 business days for order processing.

Free delivery from €200 / for oversized shipments from €400

Free of charge, ready for pickup on the next business day

For more information, please see our Delivery page.