Pinguin Skyline XL, Blue

This description has been machine translated from the original text.

The upper material is a proven polyester laminated with a waterproof membrane, with a diamond-shaped RipStop treatment that increases the durability of the fabric and prevents it from fraying in the event of a tear.

The two valves are made of nylon and the drain valve is also fitted with a silicone flap for a 100% seal.

The chambers of the mattress are connected in an H-shape. This design does not create cold joints and also prevents the air inside from swirling. In addition, BHB microfiber insulation is glued to the inside of the chambers, which significantly increases thermal comfort.

Thanks to the integrated pump, you won't have to bother with inflation. Simply open the valve and after two minutes of pouting you are ready to lie down.

The integrated foot pump is a very simple device in principle. It consists of a chamber made of impermeable foam, a one-way flap and a lid. Once you open the lid, the chamber fills with air. Your task is to press the entire chamber down so that your foot plugs the opening and pushes the air out of the chamber through the flap and into the mattress. You then lift your foot to allow new air to enter the chamber from the outside and compress again as described above. Repeat this until the mattress is inflated and then close the lid.

Therefore, to prevent air from escaping through the top fabric of the mattress, an impermeable membrane is laminated to the polyester fabric. Laminating a continuous membrane instead of applying a coating eliminates the possibility of applying an uneven layer of coating in areas with material irregularities. This can lead to the application of an insufficient coating layer and air leakage in such affected areas. The use of PU foam with a thermally laminated membrane (TPU) is the highest quality material combination on the market today.

The top and bottom fabrics are not joined directly, which would create cold joints, instead they are joined by a baffle that holds the shape while allowing perfect thermal insulation. In addition, a thin layer of BHB Micro insulation is attached to the inside of the chambers to maximise the insulation effect while having almost no effect on weight and packability.