Pinguin tent Campus 3, Green

This description has been machine translated from the original text.

Tropico is made of Polyester with a polyurethane coating, guaranteeing a water column of 4000mm. The seams are taped with waterproof tape. The lining is made of Nylon with Polyurethane coating, providing 10 000mm water column. The members consist of laminate segments of 9.5mm (main members), 8.5mm (hallway members) and 7mm (reinforcement above the bedroom entrance).

Description

The tent is double-skinned and consists of an inner tent and an outer shell - tropical. The inner tent has a rectangular floor plan with one entrance on the longer side. The outer tent has a large vestibule which can be entered through two different entrances.

Tent concept

It is based on the principle of a rod structure strung in tunnels of perforated material outside the tropic. After threading the rods through the tunnels, the tropic and the inner tent (which is suspended under the tropic) are erected simultaneously. The advantage of this method is that the inner tent can be detached from the canopy and the canopy can then be erected separately, giving a single-skin tent without a floor.

Ventilation

It is located in the top of the dome of the tropical dome. The ventilation windows are shaped so that they are not tilted by the wind. This prevents leakage even in rain with strong winds.

Tent construction

Push the construction rods through the perforated sleeves on the outside of the tent and insert the ends of the rods into the brass eyelets on the loops on the bottom edge of the tent. Then clip the buckles on the straps at the ground inside the tent to erect it. Fasten the inner tent into the loops on the inside of the tent. Anchor the tent with pegs and cords and fasten with plastic buckles.