Pinguin tent Omega 4, Blue

This description has been machine translated from the original text.

The Omega 4 tent is a generous space solution for larger groups or family camping.

It is made of Polyester with a polyurethane coating, which gives it a water column of 4,000mm. The seams are taped against leakage with heating tape. The liner is made from Nylon with a Polyurethane coating giving it a 10,000mm water column.

The rods consist of laminate segments with diameters of 9.5 and 11 mm.

The tent is double-skinned and consists of an inner tent and an outer shell - the tropic. The inner tent has a rectangular plan with an entrance on the longest side. The outer tent has two entrances that can be supported to form a canopy over the entrance.

Tent concept

It is based on the principle that a rod structure strung in sleeves of perforated material is outside the tropic. After threading the rods through the sleeves, the tropic and the inner tent (which is suspended under the tropic) are erected simultaneously. The advantage of this method is that the inner tent can be detached from the canopy and the canopy can then be erected separately, giving you a single-skin tent.

The ventilation is located in the top of the dome of the tent. The ventilation windows are shaped so that they are not tilted by the wind. This prevents leakage even in rain with strong winds.

Tent construction

Push the construction rods through the perforated sleeves on the outside of the tropical tent and insert the steel spikes threaded on the floor of the tropical tent into the tubes at the end of the rods. The inner tent is fastened into the loops on the inside of the tent. Anchor the erected tent with pegs and cords and fasten with plastic clips.