Pinguin tent Storm 4, Green
Delivery options
- Courier - GLS: Monday 03.06.
- Personal collection to the shop [Nitra, Bratislava 2663/21]: Monday 03.06.
- Package to keep the Slovak post office: Monday 03.06.
- Zasielkovna: Monday 03.06.
- Osobný odber nadrozmerného tovaru: Monday 03.06.
- Packeta - HD: Monday 03.06.
- AlzaBox: Monday 03.06.
- SDS: Wednesday 05.06.
Poštovné |
Garancia výmeny |
Garancia vrátenia |
98% |
This description has been machine translated from the original text.
A very spacious tunnel-type tent, suitable even for poor weather conditions, thanks to its low profile.
The tunnel construction guarantees a very good use of the interior space.
The Tropico is made of Polyester with polyurethane coating, guaranteeing a water column of 4000mm. The seams are taped with waterproof tape. The liner is made of Nylon with a Polyurethane coating, providing a 10,000mm water column.
The rods consist of laminate segments with a diameter of 9.5mm.
Description
The double shell tent consists of an inner tent and an outer shell - the tropic. The entrance to the inner tent is at the front, the outer tent has a large vestibule, suitable for storing luggage, cooking etc., which can be entered through the front or side entrance.
Tent concept
It is based on the principle whereby a rod structure, strung in sleeves, is outside the tropic. The tropic and the inner tent (which is suspended under the tropic) are then erected simultaneously after the sleeves are threaded through the poles. The advantages of this method are: the construction of the tent is very fast, if it rains, the inner tent does not get wet, the inner tent can be detached from the tropical tent and the tropical tent can be built separately, thus obtaining a single-skin tent without a floor.
Ventilation
It is provided by three ventilation windows, which are located at the front entrance and at the back of the tropical tent. The roof of the ventilation window is shaped so that it is not tilted by the wind. This prevents leakage even in rain with strong winds.
Tent construction
We push the construction rods through the sleeves and insert the steel spikes into the tubes at the end of the rods, which are threaded onto the loops on the bottom edge of the tropical tent. Fasten the inner tent into the loops on the inside of the tent. The tent is not self-supporting, it must be anchored with at least a minimum number of pegs or breakaway lines. Finally, we use the plastic clips at the bottom edge of the tent.