Pinguin tent Summit 3, Green

This description has been machine translated from the original text.

Spacious and lightweight semi-geodetic tent with very good stability in the wind is suitable for climbing, hiking and for anyone who appreciates its rigid construction with three poles and four crossing points. It has an exceptionally spacious vestibule and low weight.

The Tropico is made of Polyester with a polyurethane coating, guaranteeing a water column of 4,000mm. The seams are taped with waterproof tape. The liner is made of Nylon with a Polyurethane coating, providing a 10,000mm water column.

The rods consist of 9.5mm diameter duralumin segments (7001 T6).

The tent is double-skinned and consists of an inner tent and an outer shell - tropical. The inner tent has a trapezoidal floor plan with one entrance. The tent has a spacious vestibule with two entrances. The vestibule can be used to store luggage or provide a shelter when cooking. The concept of the tent is based on the principle of a rod structure strung in sleeves outside the tropic.

Tropico and the inner tent (which is suspended under the tropico) are erected simultaneously after threading the rods through the sleeves. The advantage of this method is that the inner tent can be detached from the canopy and the canopy can then be erected separately. This way you get a single-skin tent without a ground sheet.

The ventilation is located in the top of the tent. The ventilation windows are shaped so that they are not folded by the wind and can be closed with Velcro if necessary. This prevents leakage even in rain with strong winds.

Construction of the tent

Push the construction rods through the tunnels on the outside of the canopy and insert the ends of the rods into the brass eyelets on the loops on the bottom edge of the canopy. Then clip the buckles on the straps and at the ground inside the tent to erect the tent. Fasten the inner tent into the loops on the inside of the tent. Anchor the tent with pegs and cords and fasten with plastic clips.